Dishmachine Maintenance Instructions
Wash TankThermostat
Replacement
(From EGO brand to Stemco)
07610-003-18-19 A
July 26, 2006
AFTER MAINTENANCE ACTIONS
Once the new thermostat is installed, it will be necesary to
ensure that it operates at the required and appropriate ranges. The
new thermostat has an adjustment that can be turned using a small
flathead screwdriver. Several cycles will need to be run on the unit
while observing the final rinse temperature. The thermostat needs
to cycle so that the final rinse water meets the indicated minimums
on the machine data plate for every cycle.
SPECIAL NOTES
Work performed on Jackson dishmachines by unautho-
rized or unqualified personnel may void the warranty. Before begin-
ning this or any other maintenance evolution on a unit under war-
ranty, you should contact a certified Jackson technician or Jackson
Technical Service. You can find a list of qualified service agencies
in the back of you unit’s installation manual.
SPECIAL PARTS
N/A
CONTACT INFORMATION
Jackson MSC Inc. provides technical support for all of the
dishmachines detailed in this manual. We strongly recommend that
you refer to this manual before making a call to our technical sup-
port staff. Please have this manual with you when you call so that
our staff can refer you, if necessary, to the proper page. Technical
support is available from 8:00 a.m. to 5:00 p.m. (EST), Monday
through Friday. Technical support is not available on holidays.
Contact technical support toll free at 1-888-800-5672. Please
remember that technical support is available for service personnel
only.
Wash RegulatingThermostat Replacement Instructions
Revision A (07/26/2006)
3
|