Insignia TV Video Accessories NS WG1542 User Manual

USER GUIDE  
Corner  
TV Stand  
NS-WG1542  
SAFETY INFORMATION AND SPECIFICATIONS....2  
PACKAGE CONTENTS: HARDWARE..........................3  
PACKAGE CONTENTS: PARTS.....................................4  
ASSEMBLY INSTRUCTIONS.........................................5  
CARE AND MAINTENANCE.........................................9  
Before using your new product, please read these instructions to prevent any damage.  
 
CORNER TV STAND  
Caution: Do not use power tools to assemble your  
Note: Make sure that you have all the hardware  
stand.  
necessary to assemble your new TV stand.  
Tools needed:  
Phillips screwdriver  
PACKAGE CONTENTS: HARDWARE  
Note: The table below shows the required  
hardware. You may receive extra hardware.  
Label Hardware  
Qty.  
Label Hardware  
Qty.  
Cable  
collar  
H
1
M
1
Allen bolt - 6 mm x 25 mm  
Glass spacer  
I
4
4
Phillips screw -  
4 mm x 15 mm  
N
O
6
4
J
Floor  
leveler  
Shelf bolt  
K
L
4
2
Allen screw - 5 mm x 50 mm  
Allen bolt - 6 mm x 50 mm  
P
1
Allen wrench  
1
2
3
4in  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100mm  
3
 
 
CORNER TV STAND  
PACKAGE CONTENTS: PARTS  
Make sure that you have all the parts necessary to assemble your new TV stand. While not all parts are labeled,  
some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other.  
Use this part identification to help identify similar parts.  
Carefully unpack and identify each component before attempting to assemble. Refer to the parts list.  
Please take care when assembling the unit and always place the parts on a clean, soft surface.  
If you require any assistance with assembly, parts, or information on other products, please visit our website:  
Wood in its natural state comes with variations in color and grain, so not all pieces of wood will match in color and  
grain. These variations are compounded when you try to match a number of pieces of wood, such as you would  
have when making a piece of furniture. This is normal.  
C. Support bar (1)  
D. Rear panel (1)  
A. Leg (2)  
B. Frame (1)  
G. Bottom shelf (1)  
E. Top shelf (1)  
F. Middle shelf (1)  
4
 
 
CORNER TV STAND  
ASSEMBLY INSTRUCTIONS  
Step 1: Preparing the legs and frame.  
Caution: Do not fully tighten allen bolts (L) until Step 2.  
1 Screw four floor levelers (J) into the holes in the legs (A).  
2 Connect the slots on the legs (A) to the slots on the frame (B), and attach using four allen screws (K) with the  
allen wrench (P).  
Tips:  
The back side of frame (B) is labeled "Back."  
The top of the legs (A) and the top of the frame (B) should be flush when the parts are connected.  
3 Attach the support bar (C) to the legs using two allen bolts (L) with the allen wrench (P).  
Tip: The hole in the support bar (C) should face up (see the arrow).  
You’ll need:  
4 - Allen screws (K)  
4 - Floor levelers (J)  
1 - Allen wrench (P)  
2 - Allen bolts (L)  
5
 
 
CORNER TV STAND  
Step 2 Attaching the back panel and the top shelf  
:
CAUTION: Tempered safety glass is used. It is stronger than normal glass, and it will not break into long,  
sharp, knife-like shards. However, safety glass can break. When safety glass breaks, it instantly fractures  
into small, bead-like pieces. These small pieces may have sharp edges.  
For your safety, follow these precautions when you assemble your product:  
Wear safety glasses or other eye protection.  
Do not try to drill into or cut safety glass. It will instantly break into small pieces.  
Do not force the glass into position.  
If the glass breaks, be careful when you pick up the pieces. They may have sharp edges.  
1 Insert the cable collar (H) into the hole in the rear panel (D).  
2 Attach the rear panel (D) to the back of the legs with the cable clip of the cable collar facing out using six phillips  
screws (N).  
3 Insert four glass spacers (I) into the holes in the frame.  
4 Carefully place the top shelf (E) onto the top two glass spacers and align the metal tab with the hole in the  
support bar (C).  
5 Screw one allen bolt (M) through the hole in the support bar (C) and into metal tab on the top shelf (E).  
6 Tighten the allen bolts (L) from the previous step.  
You’ll need:  
6- Phillips screws (N)  
1- Allen bolt (M)  
4 - Glass spacers (I) 1 - Allen wrench (P)  
Phillips screwdriver  
1 - Cable collar (H)  
6
 
CORNER TV STAND  
Step 3 Attaching the middle and bottom shelves.  
:
1 Carefully place the smaller bottom shelf (G) onto the glass spacers in the frame and into the shelf supports.  
2 Screw two shelf bolts (O) into the holes in the bottom shelf supports - do not overtighten.  
3 Carefully place the middle shelf (F) through the slots in the frame and into the shelf supports.  
4 Screw two shelf bolts (O) into the holes in the middle shelf supports - do not overtighten.  
You’ll need:  
4 - Shelf bolts (O)  
Phillips screwdriver  
7
 
CORNER TV STAND  
Step 4 Adjusting the floor levelers.  
:
• Make sure all floor levelers are adjusted properly and have firm contact with the floor.  
DO NOT exceed the weight limits shown.  
CAUTION!: When moving the stand, do not lift the glass top. Use two adults and lift from the frame or leg assembly.  
Please use care and good judgement when placing objects on top and middle shelves.  
70 lbs. (31 kg)  
25 lbs. (11.34 kg)  
8
 
CORNER TV STAND  
CARE AND MAINTENANCE  
Wood/Laminate  
• Use your favorite type of furniture polish.  
• Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand.  
• Always test any polish in a discrete location first, such as the back of the stand, to make sure that there is no  
adverse reaction.  
• Dust frequently with a soft cloth.  
• Never slide objects across surfaces. Lift objects from the top surface rather than dragging them across the finish  
when moving them.  
• Do not expose your stand to direct sunlight, drying heat sources, or dampness.  
Glass  
• Use a commercial liquid glass cleaner and a soft cloth.  
• Do not use harsh powders or any other abrasive substances as they will scratch the glass.  
• Clean spills immediately with a soft, damp cloth.  
• Protect surfaces by using felt, leather, or cork under accessories.  
• Use a protective pad when using your stand as a writing surface (especially when using a ballpoint pen).  
• Dust frequently with a soft cloth.  
WARNING  
Please use your stand correctly and safely. Improper use can cause safety hazards or damage to your furniture or household items. Carefully read  
the following chart.  
Look out for:  
What can happen:  
How to avoid the problem:  
• Children climbing on the stand.  
• Risk of injury or death.  
• Never allow children to climb on or play with the stand.  
• A child may try to reach a toy or other object by climbing • A child climbing on the stand can make it top-heavy and • Do not place toys or food on the top shelves. Children may  
on the stand.  
• Children will play and be active near the TV.  
cause it to tip over.  
• A child playing with a TV can cause it to tip over.  
try to climb to reach them out of curiosity.  
• Improper use of the stand to support TVs.  
• Risk of injury or death.  
• A TV must only be set on furniture specifically designed to  
support a television.  
• Never use a TV that exceeds the weight ratings or size  
guidelines specified for the stand.  
• The stand is designed for use with TVs will specify the • TVs can be very heavy. Note, older CRT TVs tend to be  
maximum weight rating and recommended size of the  
TVs it will safely support.  
unbalanced and prone to tipping forward.  
• Overloaded shelves.  
• Risk of injury.  
• Top-heavy furniture can tip over.  
• Overloaded shelves can break.  
• Never exceed the weight limits. The bottom shelves can only  
support 25 lbs. while the top can support 70 lbs.  
• Work from the bottom to the top when loading shelves.  
• Improperly moving the stand.  
• The stand can tip over or break if improperly moved.  
• Risk of injury.  
• Unload shelves from the top to the bottom before moving  
the stand.  
• Do not push the stand, especially on a carpeted floor. Have a  
friend help you lift the item and set it in place.  
• Do not lift the stand using the top shelf. Lift from the frame  
or leg assembly.  
• Remove the TV before moving the TV stand.  
9
 
 
CORNER TV STAND  
10  
 
CORNER TV STAND  
Modification of any part of the Product, including the  
antenna  
ONE-YEAR LIMITED  
Display panel damaged by static (non-moving) images  
WARRANTY - INSIGNIA  
applied for lengthy periods (burn-in).  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Insignia  
to service the Product  
Definitions:  
The Distributor* of Insignia branded products warrants to you,  
the original purchaser of this new Insignia-branded product  
(“Product”), that the Product shall be free of defects in the  
original manufacturer of the material or workmanship for a  
period of one (1) year from the date of your purchase of the  
Product (“Warranty Period”).  
Products sold “as is” or “with all faults”  
Consumables, including but not limited to batteries (i.e. AA,  
AAA, C etc.)  
Products where the factory applied serial number has been  
altered or removed  
For this warranty to apply, your Product must be purchased in  
the United States or Canada from a Best Buy branded or Future  
Shop branded retail store or online at www.bestbuy.com,  
www.bestbuy.ca, or www.futureshop.ca and is packaged with  
this warranty statement.  
Loss or Theft of this product or any part of the product  
Display panels containing up to three (3) pixel failures (dots  
that are dark or incorrectly illuminated) grouped in an area  
smaller than one tenth (1/10) of the display size or up to  
five (5) pixel failures throughout the display. (Pixel based  
displays may contain a limited number of pixels that may  
not function normally.)  
How long does the coverage last?  
Failures or Damage caused by any contact including but  
not limited to liquids, gels or pastes.  
The Warranty Period lasts for 1 year (365 days) from the date you  
purchased the Product. Your purchase date is printed on the  
receipt you received with the Product.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS  
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA  
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
What does this warranty cover?  
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS  
OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT  
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT,  
LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES  
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE  
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE  
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN  
During the Warranty Period, if the original manufacture of the  
material or workmanship of the Product is determined to be  
defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product  
with new or rebuilt parts; or (2) replace the Product at no charge  
with new or rebuilt comparable products or parts. Products and  
parts replaced under this warranty become the property of  
Insignia and are not returned to you. If service of Products or  
parts are required after the Warranty Period expires, you must  
pay all labor and parts charges. This warranty lasts as long as you  
own your Insignia Product during the Warranty Period. Warranty  
coverage terminates if you sell or otherwise transfer the Product.  
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY  
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND  
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT  
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail  
store location, please take your original receipt and the Product  
to any Best Buy or Future Shop store. Make sure that you place  
the Product in its original packaging or packaging that provides  
the same amount of protection as the original packaging. If you  
purchased the Product from a Best Buy or Future Shop online  
INSIGNIA is a trademark of Best Buy and its affiliated companies.  
Registered in some countries.  
to the address listed on the web site. Make sure that you put the  
Product in its original packaging or packaging that provides the  
same amount of protection as the original packaging.  
To obtain warranty service, in the United States call  
1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call  
1-800-663-2275. Call agents may diagnose and correct the issue  
over the phone.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2014 Best Buy. All rights reserved.  
Made in Taiwan  
Where is the warranty valid?  
This warranty is valid only in the United States and Canada at  
Best Buy or Future Shop branded retail stores or websites to the  
original purchaser of the product in the county where the  
original purchase was made.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to weather, lightning, and other acts of God,  
such as power surges  
Accidental damage  
Misuse  
Abuse  
Negligence  
Commercial purposes/use, including but not limited to use  
in a place of business or in communal areas of a multiple  
dwelling condominium or apartment complex, or  
otherwise used in a place of other than a private home.  
11  
 
Certificate of Conformity  
1. This certificate applies to the Insignia product  
identified by this instruction booklet.  
2. This certificate applies to the compliance of this  
product with the CPSC Ban on Lead-Containing  
Paint (16 CFR 1303).  
3. This product was manufactured for:  
Insignia  
4. Date of Manufacture: _______________  
Lot number: 417095  
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)  
INSIGNIA is a trademark of Best Buy and its affiliated companies.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2014 Best Buy. All rights reserved.  
Made in Taiwan  
V2 ENGLISH  
14-0295  
 

Indesit Dishwasher IDE 45 User Manual
InFocus Projection Television IN111oa User Manual
Insignia TV DVD Combo ns 7utctv User Manual
Insignia TV DVD Combo NS CL19C User Manual
JL Audio Car Speaker 94376 User Manual
Kalorik Blender USK BL 24088 User Manual
Kathrein Satellite TV System UFD 346 User Manual
Kenmore Sewing Machine 10101 User Manual
Kenwood Radio Antenna 870AV User Manual
Kodak Camcorder ZE1 User Manual