Quick Setup Guide NS-PSB4521/NS-PSB4521-C
I
2.1 Bluetooth Desktop Speaker System
Congratulations on your purchase of a high-quality
Insignia product. Your 2.1 Bluetooth Desktop Speaker
System is designed for reliable and trouble-free
performance.
FEATURES
SETTING UP AND TURNING ON
CONNECTING WITH A BLUETOOTH DEVICE
Pairing with a Bluetooth device
1 Make sure that your speaker system is turned on.
If a 3.5 mm cable is not connected to the AUX jack, your
speaker system is in Bluetooth mode. The blue LED
blinks rapidly when your speaker system is in pairing
mode and lights continuously when your speaker
system is paired to a device.
2 If the blue LED is not blinking rapidly, press and hold
the Power/pairing button for three seconds.
3 Make sure that your Bluetooth device is within
33 feet (10 meters) of your speaker system.
4 On your source device, turn on the Bluetooth feature,
then set your device to pairing mode. (For instructions,
see the documentation that came with your Bluetooth
device.) On your Bluetooth device, select
Right speaker
(front)
Subwoofer
(right)
PACKAGE CONTENTS
• Subwoofer with an attached 5-foot (1.5-meter)
power cord
• Right satellite speaker with an attached 5-foot
(1.5-meter) cable
• Left satellite speaker with an attached 5-foot
(1.5-meter) cable
Left
speaker
(back)
Right
speaker
(back)
Vol
Bass
Power/pairing
Power/pairing button
LED
Volume knob
Bass knob
• 3.5 mm 5-foot (1.5-meter) stereo audio cable
• Quick Setup Guide
Right speaker
(back)
Left speaker
(back)
Bass Power/pairing
Insignia NS-PSB4521.
Your speaker system pairs with the Bluetooth device
and the blue LED lights continuously.
Note: If you are pairing with a computer, make sure that your
Bluetooth speaker is selected as the computer’s default playback
device. See the computer’s documentation for instructions.
Make sure that your Bluetooth device supports the
Bluetooth 3.0 + EDR A2DP protocol and that your device is not
paired with another device.
FIND YOUR USER GUIDE ONLINE!
AUX jack
We are going green so a copy of your User Guide is
not provided in the box but is available online.
To find your manual, touch the ? icon on your tablet
Support & Service. Enter your model number in
the box under Manual, Firmware, Drivers &
Product Information, then click ►.
(front)
Audio
cable
Audio
cable
1 Plug the cable attached to the right speaker into the R
jack on the subwoofer.
2 Plug the cable attached to the left speaker into the L jack
Subwoofer
(right)
on the subwoofer.
To determine what Bluetooth protocol your device supports,
see the documentation that came with your device.
R jack
3 Plug the power cord attached to the subwoofer into a
power outlet.
L jack
RECONNECTING TO A PAIRED DEVICE
1 If your speaker system is turned off, turn it on.
2 Make sure that your Bluetooth device is turned on,
the Bluetooth feature on the device is turned on, and
the device is within range of your speaker system with
no obstructions between your speaker system and
the device.
4 Press the Power/pairing button for about half a second.
Your speaker system turns on.
5 Follow one of the connection methods (Bluetooth or
wired) to connect the speaker system to a source.
Power cord
When the LED is...
Your speaker set is...
blue and blinks rapidly
in pairing mode
blue and lights continuously connected to a Bluetooth device
Note: If your speaker system and your Bluetooth device do not
automatically re-pair, select Insignia NS-PSB4521 on your
Bluetooth device.
blue and blinks slowly
green
connecting to a Bluetooth device
in AUX IN mode
Before using your new product, please read
these instructions to prevent any damage.
|