Port Switching
You can switch ports via remote switch button,
mouse or hotkey commands.
Port Switching via Hotkey Commands
To trigger a Hotkey Mode, simply press [Scroll
Lock] [Scroll Lock]**. Please refer to Hotkey Sum-
mary Table for details.
Port Switching via Remote Switch Button
Simply press the remote switch button once to
switch focus to the next port.
**Note: If there is a conflict using [Scroll Lock]
[Scroll Lock] sequence, you can change to the
alternative sequence [Ctrl] [Ctrl] by press and
holding the remote switch button for 3 seconds.
When you press and hold the remote switch
button for 3 second when the sequence is [Ctrl]
[Ctrl], it will change the sequence back to [Scroll
Lock] [Scoll Lock].
Port Switching via Mouse
Simply press scroll wheel button twice rapidly to
switch focus to the next port.*
*Note: This feature requires a mouse that has a
scroll wheel. Also, this feature can only be used
when both Mouse Emulation Mode and Mouse
Port-Switching Mode are enabled.
13
